Módulo de interferência DDS multibanda

DDS Jammer Module 20-6000MHz | 50W/100W | +28Vdc

Ultra-wide frequency range
High output power
Industrial temperature range
Compact form factor

Categoria: Série de Inibidores de Comunicação Etiquetas: 20-6000MHz, DDS Jammer module, multi-band interference system, portable jamming device

Detalhes do produto

Características do produto

A compact DDS-based jammer module covering 20MHz to 6000MHz. Output power 47-50±1dBm (equivalent to 50W or 100W depending on configuration). Operates on +28V DC power supply. Running temperature range -20°C to +80°C. Dimensions 175 x 164 x 60mm. Suitable for integration into wideband jamming systems.

Especificações principais

Banda de frequência	20-6000MHz
Fonte de alimentação	+28 Vdc @50W/100W
Potência de saída	47-50 ±1dBm
Temperatura de funcionamento	-20 ~ +80℃
Dimensão	175 × 164 × 60 mm

Perguntas frequentes

Q1: What is the actual output power in watts?: 47-50±1dBm corresponds to approximately 50W to 100W (50W = 47dBm, 100W = 50dBm). The exact value depends on the power supply and module tuning.
Q2: What does “DDS” mean for this jammer module?: Direct Digital Synthesis allows precise frequency generation, fast hopping, and multiple waveform outputs. It provides better spectral purity and agility than analog VCO designs.
Q3: What power supply is required?: The module requires +28V DC. At 50W output typical current draw is around 5-7A; at 100W expect 10-12A (depending on efficiency).
Q4: Can it run continuously at full power at +80°C?: At +80°C ambient, the module may need derating or active cooling. The specified operating range is -20~+80°C, but continuous full-power operation at extreme high temperatures requires proper heat sinking or forced air cooling.
Q5: Is this module legal for civilian use?: No. In most countries (US, EU, China, etc.), jammers are prohibited for civilian possession or use. Only authorized government, military, or law enforcement entities may legally operate this device. Check local laws before any purchase.