DDS jammer module Multi-Band Interference

DDS Jammer Module 20-6000MHz | 50W/100W | +28Vdc

  • Ultra-wide frequency range
  • High output power
  • Industrial temperature range
  • Compact form factor

Product Details

Product Features

A compact DDS-based jammer module covering 20MHz to 6000MHz. Output power 47-50±1dBm (equivalent to 50W or 100W depending on configuration). Operates on +28V DC power supply. Running temperature range -20°C to +80°C. Dimensions 175 x 164 x 60mm. Suitable for integration into wideband jamming systems.

Key Specifications

Frequency band20-6000MHz
Power Supply+28 Vdc @50W/100W
Output power47-50 ±1dBm
Running temperature-20 ~ +80℃
Dimension175 × 164 × 60 mm

FAQ

Q1: What is the actual output power in watts?
47-50±1dBm corresponds to approximately 50W to 100W (50W = 47dBm, 100W = 50dBm). The exact value depends on the power supply and module tuning.
Q2: What does “DDS” mean for this jammer module?
Direct Digital Synthesis allows precise frequency generation, fast hopping, and multiple waveform outputs. It provides better spectral purity and agility than analog VCO designs.
Q3: What power supply is required?
The module requires +28V DC. At 50W output typical current draw is around 5-7A; at 100W expect 10-12A (depending on efficiency).
Q4: Can it run continuously at full power at +80°C?
At +80°C ambient, the module may need derating or active cooling. The specified operating range is -20~+80°C, but continuous full-power operation at extreme high temperatures requires proper heat sinking or forced air cooling.
Q5: Is this module legal for civilian use?
No. In most countries (US, EU, China, etc.), jammers are prohibited for civilian possession or use. Only authorized government, military, or law enforcement entities may legally operate this device. Check local laws before any purchase.
Scroll to Top

Leave A Message

Please provide as much detail as possible so we canbetter assist you.
satellite_communication

Get Your Tailored Communication Solution

Please specify your deployment platform and operational requirements. Our RF experts will review your architecture and provide professional technical recommendations within 24 hours.

Product Support & Technical Consultation

Looking-for-the-Right-Solution

Discuss Your RF & Microwave Requirements

Looking for microwave or millimeter-wave integrated circuit products? Share your application requirements and our team will recommend suitable solutions based on your frequency range, power level, and system architecture.

Product Support & Technical Consultation