وحدة مدمجة معالج الإشارات الرقمية (DSP) للكشف عن الطائرات بدون طيار وتحديد مواقعها

This high-precision, 380g passive drone detection module uses DSP-based spectrum analysis to track 3D coordinates and pilot locations. It offers IP65 protection, <5W power draw, and USB/CAN interfaces.

DSP-Driven Passive Spectrum Analysis
Comprehensive Real-Time Telemetry Mapping
Standardized Industrial Interfaces
Compact, Ruggedized SWaP Architecture

الفئة: سلسلة الوحدات العلامات: 3D Drone Tracking, CAN Bus UAV Module, وحدة كشف الطائرات بدون طيار, محلل الطيف DSP, Embedded Positioning Core, جهاز تعقب الطائرات بدون طيار السلبي

تفاصيل المنتج

ميزات المنتج

This high-precision module detects and tracks drones and controllers via DSP-based spectrum analysis, delivering real-time data (model, 3D coordinates, speed, pilot location) even in EMI-heavy environments. Standardized interfaces (e.g., USB, CAN) enable rapid integration with 70% lower development effort.

Function:

- Passive detection
  Only receives signals without transmission.
- Locatable models
  DJI Mavic, Air, Mini, FPV and Avata.
- Output data
  Drone model, serial number, longitude, latitude, altitude, speed, pilot coordinates, etc.
- Remote maintenance
  Supports remote firmware update.
- Compact design
  Integrated structure, weighs only 380g.
- Agile development
  Built-in software for standalone operation and secondary development.
- Standard interface & Low power consumption
  Equipped with SMA RF interface. Power consumption below 5W.
Note: This module is only compatible with specific drone models. Please refer to the specification document for details.

المواصفات الرئيسية

اسم المنتج	Positioning module
Drone models locatable	DJI Mavic, Air, Mini, FPV, Avata
التردد	2.4GHz, 5.8GHz
استهلاك الطاقة	≤5W
مصدر الطاقة	DC 9-36V
درجة الحرارة أثناء التشغيل	-20℃ to +60℃
مقاوم للماء	IP65
الوزن	~380g
الحجم	167 × 83 × 42mm

الأسئلة الشائعة

Q1: Which drone models can this module detect?: It can detect DJI series (Mavic, Phantom, Inspire, Matrice), AUTEL EVO series, many self‑made FPV drones (using common 2.4GHz/5.8GHz video/control links), and WiFi‑based toy or consumer drones operating at 2.4GHz or 5.8GHz.
Q2: Does it identify the drone type or just presence?: The module both detects presence and classifies the signal type, allowing identification of the drone brand or communication protocol (e.g., DJI OcuSync, WiFi, generic FPV). Classification accuracy depends on signal characteristics and firmware version.
Q3: What is the detection range?: Range depends on drone transmission power and environment. Typically 500m to 2km for standard consumer drones in open areas. Higher when the drone is closer or using amplified transmitters. The module itself has no active emission – it’s fully passive.
Q4: How is this module different from a jammer?: It is a passive detector – it only receives and analyzes signals. It does not transmit any interference. Therefore it is legal for most security applications (airports, prisons, VIP venues) where active jamming is prohibited.
Q5: What outputs or interfaces does it provide?: The standard interface (exact protocol varies by version) typically includes detection alerts, frequency band, signal strength (RSSI), and classified drone type. Integration is simplified – raw RF processing is done on‑board, so the host system only needs to handle high‑level events.