وحدة الكشف عن الطائرات بدون طيار – ماسح ترددات لاسلكية متعدد النطاقات

وحدة كشف الطائرات بدون طيار – ماسح ترددات لاسلكية متعدد النطاقات

This product collects and classifies radio signals in a certain airspace and identifies drone signals, thereby realizing the detection and identification of drones. It adopts standard interface design to simplify hardware design and reduce the complexity of software development.

- Multi‑band drone signal detection
- Passive & stealthy operation
- Easy integration
- Rugged & compact

الفئة: سلسلة الوحدات العلامات: وحدة كشف الطائرات بدون طيار, multi-band RF scanner, passive drone detector, WiFi drone detector

تفاصيل المنتج

ميزات المنتج

A compact RF‑based drone detection module that passively collects and classifies radio signals in the 900MHz, 1.1-1.4GHz, 2.4GHz, and 5.8GHz bands. Identifies drones from major brands (DJI, AUTEL), self‑made FPVs, and WiFi drones. Uses a standard interface to simplify hardware integration and reduce software development complexity. Rugged IP65 enclosure, DC9‑36V wide power input, operating temperature -20°C to +50°C. Size only 167x83x42mm for easy embedding into counter‑UAS systems.

Passive detection:This module detects drones by passively receiving signals without transmitting signals.
Detection models:It can identify common brands of drones such as DJI, Autel, DIY FPV, and WiFi drones.
Detection information:It can output information such as the number of drones, models, frequencies, accuracy, marks, etc. The integrated module weighs only 380g, making it adaptable for development and use in multiple scenarios.
Remote maintenance:Supports remote firmware upgrades to improve product maintainability.
Easy development:Equipped with PC software, it can run independently, and can be integrated with anti-drone products for secondary development as well.
Standard interface:SMA interface, stable performance and low loss.
Ultra-low consumption:The power consumption is less than 5W, green and energy-saving.

المواصفات الرئيسية

طراز طائرة بدون طيار يمكن رصده	DJI、AUTEL, and other common brands of drones and some self-made FPVs and WiFi drones
التردد	900MHz, 1.1GHz-1.4GHz, 2.4GHz, 5.8GHz
القدرة الناتجة	≤5W
مصدر الطاقة	DC 9-36V
درجة الحرارة أثناء التشغيل	-20℃ to +50℃
مقاوم للماء	IP65
الحجم	167 × 83 × 42 mm

الأسئلة الشائعة

Q1: Which drone models can this module detect?: It can detect DJI series (Mavic, Phantom, Inspire, Matrice), AUTEL EVO series, many self‑made FPV drones (using common 2.4GHz/5.8GHz video/control links), and WiFi‑based toy or consumer drones operating at 2.4GHz or 5.8GHz.
Q2: Does it identify the drone type or just presence?: The module both detects presence and classifies the signal type, allowing identification of the drone brand or communication protocol (e.g., DJI OcuSync, WiFi, generic FPV). Classification accuracy depends on signal characteristics and firmware version.
Q3: What is the detection range?: Range depends on drone transmission power and environment. Typically 500m to 2km for standard consumer drones in open areas. Higher when the drone is closer or using amplified transmitters. The module itself has no active emission – it’s fully passive.
Q4: How is this module different from a jammer?: It is a passive detector – it only receives and analyzes signals. It does not transmit any interference. Therefore it is legal for most security applications (airports, prisons, VIP venues) where active jamming is prohibited.
Q5: What outputs or interfaces does it provide?: The standard interface (exact protocol varies by version) typically includes detection alerts, frequency band, signal strength (RSSI), and classified drone type. Integration is simplified – raw RF processing is done on‑board, so the host system only needs to handle high‑level events.