SDL-Rx1024 : panneau d'antenne réceptrice bidimensionnelle à réseau phasé en bande Ka

The SDL-Rx1024 is an ultra-lightweight 675g Ka-band antenne réceptrice à réseau phasé panel integrating 1,024 active elements and advanced SmartFusion technology to deliver high-capacity downlink tracking across hybrid LEO and GEO satellite networks.

Dimensions et poids : 225×325×15mm, ≤675g Ultra-slim Sub-assembly
Technologies clés : 1024-Element Matrix, SmartFusion Engine, External Converters
Balayage de suivi : 360° Azimuth, 0°–70° Electronic Elevation Scan
Ports et alimentation : J30J-21 Control, SMA-K RF, 12V, ≤56.5W Low Draw

Catégorie : Sous-réseaux d'antennes à réseau phasé Mots-clés : Communications par satellite en bande Ka, Ka-Band Satellite Receiver, Réception par satellite LEO GEO, Antenne de réception à réseau phasé, SmartFusion Downlink Panel, Antenne à radôme ultra-fin

Détails du produit

Présentation du produit

Terminal manufacturers engineering next-generation Ka-band satellite receivers frequently encounter intense thermal bottlenecks and severe weight penalties when attempting to capture high-throughput downlinks using traditional parabolic dishes or bulky flat panels. The SDL-Rx1024 solves these hardware challenges by packing a massive 1,024-element matrix into a solid-state flat panel that is only 15mm thick. Achieving a high-efficiency G/T ratio equal to or greater than 6.5 dB/K combined with arbitrary polarization tracking, it maintains cross-polarization isolation equal to or greater than 30dB at center alignment. Operating flawlessly without mechanical wear across extreme outdoor temperatures from -40°C to +70°C, this panel provides a highly dependable Réception par satellite LEO GEO component built to sustain deep data pipes where minimal physical profile and high gain are paramount.

Caractéristiques techniques principales

Fréquence de fonctionnement en réception	17.7GHz-21.2GHz
Plage de numérisation	Plage d'élévation : 0° à 70° ; azimut : 0° à 360°
Nombre d'éléments	1024
Rendement de l'antenne (G/T)	≥6.5dB/K
Mode de polarisation	Polarisation arbitraire
Isolation par polarisation croisée linéaire	≥ 30 dB à 0°
Interface d'alimentation et de commande	J30J-21
Interface RF	SMA-K
Dimensions hors tout	225mm×325mm×15mm
Alimentation électrique d'entrée	12 V CC (11 V à 13 V)
Poids	≤675g
Consommation électrique	≤56.5W
Température de fonctionnement	-40 °C à +70 °C

FQA

Why does the SDL-Rx1024 omit internal up/down conversion circuitry from its design?: By keeping the down-conversion stages external to the primary antenna board, the SDL-Rx1024 achieves an ultra-thin 15mm profile and keeps its total weight at ≤675g. This architectural layout prevents localized thermal stacking on the active radiating panel across the demanding 17.7GHz–21.2GHz Ka-band spectrum, giving system integrators the flexibility to route raw RF lines through standard SMA-K interfaces to their own backend receivers.
How does SmartFusion technology optimize power efficiency across a large 1,024-element array?: Driving 1,024 active elements simultaneously usually demands significant power and generates intense heat. The embedded SmartFusion engine functions as an intelligent signaling and power management layer, dynamically scaling the active current draw fed to individual elements based on real-time satellite link characteristics. This optimization caps total power consumption at an ultra-efficient ≤56.5W without compromising tracking sensitivity.
What type of connection interface and electrical input does this Ka-band receiver require?: Ceci ka-band satellite receiver component uses a secure, aviation-grade J30J-21 multi-pin control port to handle both high-speed electronic beam steering tracking commands and electrical inputs. The hardware runs efficiently on a low-voltage DC 12V supply line (with a functional operating tolerance range of 11V to 13V), ensuring seamless deployment in mobile vehicle mounts, portable field kits, or compact airborne sub-assemblies.